The Ring Automotive SmartChargePro 25 Metal Case Smart Charger is a professional-grade heavy-duty battery charger that in its robust metal casing is suitable for use in any garage or workshop environment.

This unit will enable you to safely and accurately test, recondition and charge the battery using its completely automatic seven-stage charge process that is suitable for a range of 12-volt lead acid batteries including GEL, VRLA, AGM and calcium types.

You are able to opt for a 4-amp, 12-amp or 25-amp charging rate to deploy the one most suitable to provide the best charge current for the battery to be charged or to achieve a fast charge to get a vehicle up and running again.

The battery recondition process of the Ring Automotive SmartChargePro 25 Metal Case Smart Charger will then restore and improve the performance of the battery if it has been over discharged and/or left discharged for too long so that it has been affected by sulphation.

It is safe to leave the battery permanently connected to this battery charger if that is wanted, say for a vehicle that is not used over the winter, for example.

Features

• 7-stage automatic charge process
• Charge rates: 4A, 12A, 25A
• Recommended for vehicles up to 12 litres and battery capacities of between 20 Ah and 250 Ah
• LED display shows voltage, charge rate and battery status (as %) and allows battery status check
• Can be left permanently attached to battery and switched on

Specification

• Voltage: 12V
• Charge rates: 4A, 12A, 25A
• Weight: 4.1 kg